- ADSS optikai kábel
- Micro, mini kábel
- Behúzó optikai kábel
- Önfeszítős, Fig8 optikai kábel
- FTTH, fémmentes, lapos optikai kábel
- Optika csatlakozók
- Optikai aktív eszközök
- Optikai passzív eszközök
- Optikai műszerek és szerszámok
- Szerelt patch kábelek
- Drop kábelek
- Szerelési anyagok
- Kötődoboz, tartó szerelvény
Raktáron
The generic tray patching & splicing shelf FIST-GPS2 is the mechanical assembly for the fiber management system that provides the function of cable splicing and patch cord patching and connecting in a rack environment.
This shelf can be used with Tyco racks as well as with other metric (ETSI) or 19” racks.
Multiple configurations are possible:
patching
1. between patch cords
2. pre-connectorized break-out cable to patch cords
3. pre-connectorized intrafacility cable to patch cords splicing
1. loose tube cable to pigtails
2. non pre-connectorized intrafacility cable to pigtails
3. non pre-connectorized break-out cable to pigtails
4. and patching these pigtails to patch cords
The Generic Splice/Patch Shelf Trays FIST-GPST-12 are the organizer trays that house the connector adapters (typical for 12 connectors per tray, or 24 small form factor connectors), fibers and patch cords. It allows for Single Element splicing on the tray itself.
An optional basket can be installed for integrated jumper overlength storage. Refer to section 3.3 for limitations with respect to patch cord characteristics.
4 different chassis types are available:
− 167 mm high version Maximum 8 trays (or 6 trays when the storage option is selected) can be installed
− 125 mm high version Maximum 6 trays (or 4 trays when the storage option is selected) can be installed
− 88 mm high version Maximum 4 trays (or 2 trays when the storage option is selected) can be installed
− 44 mm high version Maximum 2 trays (or 1 tray when the storage option is selected) can be installed
All generic patching shelves consist of a metal chassis with drawer. A bracket is installed at the rear of the drawer on which the trays can be hinged. The connector adapters can be pre-installed in the organizer trays.
Pigtails can be pre-installed in the ‘splice unit’ area of the tray (pre-fibered options of the trayssee section 2.2). Positive fiber management of the pigtails is guaranteed by bend controls on the trays and pigtail belts in the shelf.
The generic tray patching & splicing shelf FIST-GPS2 is the mechanical assembly for the fiber management system that provides the function of cable splicing and patch cord patching and connecting in a rack environment.
This shelf can be used with Tyco racks as well as with other metric (ETSI) or 19” racks.
Multiple configurations are possible:
patching
1. between patch cords
2. pre-connectorized break-out cable to patch cords
3. pre-connectorized intrafacility cable to patch cords splicing
1. loose tube cable to pigtails
2. non pre-connectorized intrafacility cable to pigtails
3. non pre-connectorized break-out cable to pigtails
4. and patching these pigtails to patch cords
The Generic Splice/Patch Shelf Trays FIST-GPST-12 are the organizer trays that house the connector adapters (typical for 12 connectors per tray, or 24 small form factor connectors), fibers and patch cords. It allows for Single Element splicing on the tray itself.
An optional basket can be installed for integrated jumper overlength storage. Refer to section 3.3 for limitations with respect to patch cord characteristics.
4 different chassis types are available:
− 167 mm high version Maximum 8 trays (or 6 trays when the storage option is selected) can be installed
− 125 mm high version Maximum 6 trays (or 4 trays when the storage option is selected) can be installed
− 88 mm high version Maximum 4 trays (or 2 trays when the storage option is selected) can be installed
− 44 mm high version Maximum 2 trays (or 1 tray when the storage option is selected) can be installed
All generic patching shelves consist of a metal chassis with drawer. A bracket is installed at the rear of the drawer on which the trays can be hinged. The connector adapters can be pre-installed in the organizer trays.
Pigtails can be pre-installed in the ‘splice unit’ area of the tray (pre-fibered options of the trayssee section 2.2). Positive fiber management of the pigtails is guaranteed by bend controls on the trays and pigtail belts in the shelf.
